Hot Water Tanks

Carbon steel boilers S235JR with vitrification treatment, available with 1, 2, or 3 flanges.

It is possible to include an electric resistance in all versions. These models are used for the supply of hot water for domestic or industrial use. The vitrification and sizing of the magnesium anodes (included as standard) are carried out in accordance with DIN 4753 p.3.

Maximum operating pressure for sanitary use: 10 bar (models 200–3000)

Maximum operating pressure for sanitary use: 8 bar (models 4000–5000)

Maximum operating temperature: 95°C

Insulation made of 50mm rigid polyurethane foam (models 200–500)

Insulation made of 75mm rigid polyurethane in shells (models 800–1000)

Insulation made of 100mm soft fiber fleece (models 1500–5000).

W-Total 1F:

Sanitary water storage boiler with 1 flange Ø170mm (models 200–5000)

W-Total 2F:

Sanitary water storage boiler with 2 flanges Ø300mm (models 500–1000)

W-Total 3F:

Sanitary water storage boiler with 3 flanges Ø300mm (models 1500–5000)

Removable finned copper heat exchangers:

Heat exchangers available in a diameter of 170mm or 300mm in various sizes, complete with flange mounting kit.

Removable tube bundle heat exchangers in INOX 316L:

Heat exchangers available in a diameter of 300mm in various sizes, complete with flange mounting kit.

Carbon steel boilers S235JR with vitrification treatment, available with 1 or 2 fixed heat exchangers and an inspection flange.

It is possible to include an electric resistance in all versions. These models are used for the production of domestic hot water (DHW) using solar energy or a boiler. The vitrification and sizing of the magnesium anodes (included as standard) are carried out in accordance with DIN 4753 p.3.

Maximum operating pressure for sanitary use: 10 bar

Maximum operating temperature: 95°C

Insulation made of 50mm rigid polyurethane foam (models 150–500)

Insulation made of 75mm rigid polyurethane in shells (models 800–1000)

Insulation made of 100mm soft fiber fleece (models 1500–3000).

Carbon steel boiler S235JR with vitrification treatment, available with 1 or 2 heat exchangers, double-spiral on heat pump side and an inspection flange.

It is possible to include an electric resistance in all versions. These models are primarily used for the production of domestic hot water (DHW) with a heat pump, but also with solar energy or a boiler. The vitrification and sizing of the magnesium anodes (included as standard) are carried out in accordance with DIN 4753 p.3.

Insulation: 50mm rigid polyurethane (models 200–500 liters);

Insulation in 100mm soft fiber fleece (models 800–2,000 liters)

Maximum operating pressure for sanitary use: 10 bar

Maximum operating temperature of the heat exchanger: 110°C

Maximum operating temperature of the boiler: 95°C

Carbon steel boiler S235JR with vitrification treatment, equipped with 2 heat exchangers. It is possible to include an electric resistance in all versions. These models are used for the production of domestic hot water (DHW) using solar energy and a boiler.

The vitrification and sizing of the magnesium anodes (included as standard) are carried out in accordance with DIN 4753 p.3.

Integrated system with solar station and solar control unit, pre-wired and pre-assembled, with an aesthetic cover.

Composed of:

• Enamelled boiler according to DIN4753, with 2 heat exchangers
• 50 mm insulating PU foam
• Two-line solar station with air separator
• Flow meter
• Thermometer
• Safety group at 6 bar with pressure gauge
• High-efficiency pump
• One circuit control unit WRE1
• Side connections copper Ø18 mm
• All components assembled, wired, and ready
• Maximum boiler pressure: 10 bar

Carbon steel boiler S235JR: raw upper part and vitrified lower part, with 1 heat exchanger, 1 hot/cold buffer, and an inspection flange.

It is possible to include an electric resistance in all versions. These models are used for the production of domestic hot water (DHW) and heating. The vitrification and sizing of the magnesium anodes (included as standard) are carried out in accordance with DIN 4753 p.3.

Available in two sizes:

• 300/100: 275 liters boiler + 95 liters buffer
• 500/140: 410 liters boiler + 126 liters buffer

Insulation made of 50mm rigid polyurethane foam
Maximum boiler pressure: 10 bar
Maximum buffer pressure: 6 bar
Maximum temperature for boiler and buffer: 95°C
Maximum temperature for buffer heat exchangers: 110°C